Rocker Shaft Oiling on a Big Block

Print Thread

Re: Rocker Shaft Oiling on a Big Block [Re: buildanother] #673549 04/18/10 11:40 AM 04/18/10 11:40 AM
Joined: Nov 2006 Posts: 75 Illinois ChrisDavis OP member
ChrisDavis OP member Joined: Nov 2006 Posts: 75 Illinois	Is there any way I can tell by looking at the shaft as opposed to removing it? That�s why I was wondering if the oil feed holes exist on both sides of the shaft. If they do then it wouldn�t matter which side was down.

Entire Thread
Subject	Posted By	Posted
Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 02:20 PM
Re: Rocker Shaft Oiling on a Big Block	RapidRobert	04/18/10 02:33 PM
Re: Rocker Shaft Oiling on a Big Block	BSB67	04/18/10 02:53 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 03:24 PM
Re: Rocker Shaft Oiling on a Big Block	buildanother	04/18/10 03:34 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 03:40 PM
Re: Rocker Shaft Oiling on a Big Block	BSB67	04/18/10 04:06 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 04:12 PM
Re: Rocker Shaft Oiling on a Big Block	stumpy	04/18/10 04:15 PM
Re: Rocker Shaft Oiling on a Big Block	Dodgem	04/18/10 04:15 PM
Re: Rocker Shaft Oiling on a Big Block	Chilort	04/18/10 04:40 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 04:44 PM
Re: Rocker Shaft Oiling on a Big Block	MoparforLife	04/18/10 04:56 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/18/10 05:05 PM
Re: Rocker Shaft Oiling on a Big Block	BSB67	04/18/10 05:07 PM
Re: Rocker Shaft Oiling on a Big Block	Chilort	04/18/10 05:21 PM
Re: Rocker Shaft Oiling on a Big Block	BSB67	04/18/10 07:15 PM
Re: Rocker Shaft Oiling on a Big Block	dirtybee	04/18/10 08:06 PM
Re: Rocker Shaft Oiling on a Big Block	RapidRobert	04/18/10 08:41 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/22/10 01:52 AM
Re: Rocker Shaft Oiling on a Big Block	AndyF	04/22/10 02:18 AM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	04/22/10 09:39 PM
Re: Rocker Shaft Oiling on a Big Block	Stanton	04/23/10 01:22 AM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	05/06/10 07:48 PM
Re: Rocker Shaft Oiling on a Big Block	RapidRobert	05/06/10 10:20 PM
Re: Rocker Shaft Oiling on a Big Block	ChrisDavis	05/13/10 06:28 PM
Re: Rocker Shaft Oiling on a Big Block	Pyper70	05/13/10 06:48 PM
Re: Rocker Shaft Oiling on a Big Block	JohnRR	05/13/10 08:34 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To