Quote:
there was a little Roller Wheel Deal on a little Shaft / Pin / Stud with a Spring and a wire.
That's the ground for the horn relay. Seperate from your brake issue. For the brakes, pull apart the TS/brake harness coming out of the column and on the col half there should be continuity between the brake "in" wire coming downstream from the brake pedal switch (might be white) and the (2) "out" wires that go to each (L&R) rear brake light filament w the TS stalk in neutral. www.mymopar.com has wiring diagrams so you can access the colors.
live every 24 hour block of time like it's your last day on earth
| 
