Main bearing clearance problem

Print Thread

Re: Main bearing clearance problem [Re: 70Cuda383] #635907 03/10/10 07:42 PM 03/10/10 07:42 PM
Joined: Jan 2003 Posts: 25,200 Upper Midwest M MoparforLife Too Many Posts
MoparforLife Too Many Posts M Joined: Jan 2003 Posts: 25,200 Upper Midwest	We don't run anything looser than .002 and never had a problem with bearings being too tight on street, drag or circle motors. I sure wouldn't worry about your readings. BTW

Entire Thread
Subject	Posted By	Posted
Main bearing clearance problem	'72CudaRacer	03/10/10 10:46 PM
Re: Main bearing clearance problem	jamesc	03/10/10 10:51 PM
Re: Main bearing clearance problem	'72CudaRacer	03/10/10 11:04 PM
Re: Main bearing clearance problem	DaveDudek	03/10/10 10:58 PM
Re: Main bearing clearance problem	'72CudaRacer	03/10/10 11:06 PM
Re: Main bearing clearance problem	70Cuda383	03/10/10 11:06 PM
Re: Main bearing clearance problem	MoparforLife	03/10/10 11:42 PM
Re: Main bearing clearance problem	CompWedgeEngines	03/11/10 01:26 AM
Re: Main bearing clearance problem	Bob_Coomer	03/11/10 02:36 AM
Re: Main bearing clearance problem	'72CudaRacer	03/11/10 02:44 AM
Re: Main bearing clearance problem	'72CudaRacer	03/11/10 03:05 AM
Re: Main bearing clearance problem	CompWedgeEngines	03/11/10 03:43 AM

Hop To