Quote:

---

I know some SS/AH guys are pulling vac thru the fuel pump plate. Good "quiet" part of the motor. No valve cover hoses.

---

That is a good place to pick up from but you need to
put a BIG hose on it if its a single hose coming off
that point, you have 2 hoses coming off the V/C, you
need to move a fair amount of air
EDIT
it would take a 1 1/8" to give you the same sq in of
area as the 2-3/4 hoses... so your looking at a
tube of maybe 1 1/4" to weld to the cover and I would
put a baffle on the inside of the plate