Quote:

I'm in the process of putting disc brakes from donor car 73 Coronet onto my 71 Challenger.
I realize the spindle height on the Coronet is a bout 1/4 inch more. Has anyone done this? I realize it will change the geometry somewhat. But will I notice? Thanks!



We need one of those little pop ups that says "congrats, you're the one millionith person to ask this question"!

Tall knuckle vs short knuckle has been a big debate for at least 10 years. I'm sure nobody wants to even talk about it anymore it has been so beat to death. If you're concerned about over angling the upper ball joint then just buy the upper a arms from Firm Feel which have the ball joint angle adjusted to work with the taller arms.

I recommend the tall knuckles for any performance applications. Tall knuckles, FFI upper arms, and a 13 inch brake kit is the combo that works the best with a 17 inch rim. The late model FMJ knuckles are lighter than the shorter A body knuckles and they give you a better camber curve.