What head gasket/gasket kit to use?

Print Thread

What head gasket/gasket kit to use? #603213 02/03/10 10:34 PM 02/03/10 10:34 PM
Joined: Aug 2003 Posts: 4,481 Mesa, AZ P Pat_Whalen OP super gas
Pat_Whalen OP super gas P Joined: Aug 2003 Posts: 4,481 Mesa, AZ	Tore down the 440 I just bought and it actually shows some pretty good promise. Pistons are .040 over flat tops and the cylinders still have an appreciable amount of cross hatching on them. My question is, I now need a gasket kit for this engine. What bore diameter do I use for a .040 over 440 (4.360" final bore)? Does fel-pro make a good gasket kit? I found the one on summit to be 55 bucks, but that comes with standard bore head gaskets. Should I just piece this together a gasket at a time?

Entire Thread
Subject	Posted By	Posted
What head gasket/gasket kit to use?	Pat_Whalen	02/04/10 02:34 AM
Re: What head gasket/gasket kit to use?	340dart4spd	02/04/10 02:44 AM
Re: What head gasket/gasket kit to use?	DaytonaTurbo	02/04/10 02:45 AM
Re: What head gasket/gasket kit to use?	Pat_Whalen	02/04/10 02:50 AM
Re: What head gasket/gasket kit to use?	DaytonaTurbo	02/04/10 03:02 AM
Re: What head gasket/gasket kit to use?	moparpoolman	02/04/10 04:21 AM
Re: What head gasket/gasket kit to use?	Pat_Whalen	02/04/10 04:50 AM
Re: What head gasket/gasket kit to use?	moparpoolman	02/04/10 06:25 PM
Re: What head gasket/gasket kit to use?	AndyF	02/04/10 06:40 PM

Hop To