I would appreciate being schooled on the proper way to set the valve lash on a 440 I am building.

I am using a Lunati Voodoo hydraulic cam with crane adjustable rocker arms. I put the lifters in without filling them with oil per the Mopar Performance book (the Don Taylor book said to fill them which I can go back and do). I have the correct pushrods for the adjustable arms.

I have a dial indicator and I did put timing tape on the dampner with #1 at TDC.

I also checked the cam after install with a degree wheel. It was dead on the Lunati spec at 106 degrees.

Thanks for any help.