Thrust bearing clearance too tight HELP!!

Print Thread

Thrust bearing clearance too tight HELP!! #583332 01/15/10 02:02 PM 01/15/10 02:02 PM
Joined: Oct 2007 Posts: 736 New York R/T1968R/T OP super stock
R/T1968R/T OP super stock Joined: Oct 2007 Posts: 736 New York	I installed the crank in a 440 set the thrust bearing then measured the end play and it came up too tight..002 I checked for interference and found none. Can I safely wet sand the thrust surfaces down to achieve.006???

Entire Thread
Subject	Posted By	Posted
Thrust bearing clearance too tight HELP!!	R/T1968R/T	01/15/10 06:02 PM
Re: Thrust bearing clearance too tight HELP!!	RobR	01/15/10 06:07 PM
Re: Thrust bearing clearance too tight HELP!!	lewtot184	01/15/10 06:18 PM
Re: Thrust bearing clearance too tight HELP!!	R/T1968R/T	01/15/10 06:41 PM
Re: Thrust bearing clearance too tight HELP!!	Crizila	01/15/10 07:01 PM
Re: Thrust bearing clearance too tight HELP!!	375inStroke	01/15/10 08:40 PM
Re: Thrust bearing clearance too tight HELP!!	6PakBee	01/15/10 09:05 PM
Re: Thrust bearing clearance too tight HELP!!	RapidRobert	01/15/10 10:00 PM
Re: Thrust bearing clearance too tight HELP!!	Stanton	01/15/10 10:29 PM
Re: Thrust bearing clearance too tight HELP!!	Snoopy	01/15/10 11:15 PM
Re: Thrust bearing clearance too tight HELP!!	rftroy	01/19/10 02:58 AM
Re: Thrust bearing clearance too tight HELP!!	ron-denny	01/19/10 05:38 AM
Re: Thrust bearing clearance too tight HELP!!	Crizila	01/19/10 04:44 PM
Re: Thrust bearing clearance too tight HELP!!	R/T1968R/T	01/16/10 12:02 AM
Re: Thrust bearing clearance too tight HELP!!	draginmopars	01/16/10 12:26 AM
Re: Thrust bearing clearance too tight HELP!!	Stanton	01/19/10 02:02 AM
Re: Thrust bearing clearance too tight HELP!!	aarcuda	01/19/10 02:17 AM
Re: Thrust bearing clearance too tight HELP!!	SSAAHemiFan	01/19/10 08:50 PM
Re: Thrust bearing clearance too tight HELP!!	Dodgem	01/19/10 09:41 PM

Hop To