Hughes SOLID cam users - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hughes SOLID cam users

Print Thread

Re: Hughes SOLID cam users [Re: S/ST 3040] #563740 12/27/09 04:52 PM 12/27/09 04:52 PM
Joined: Aug 2006 Posts: 83 Mississippi Gulf Coast M Mroctober member
Mroctober member M Joined: Aug 2006 Posts: 83 Mississippi Gulf Coast	Quote: I ran an older HEV6876AS in my 340 with iron heads. I picked the wrong grind. Went 10.74 @ 124.73 MPH I got that cam for sale 100.00

Entire Thread
Subject	Posted By	Posted
Hughes SOLID cam users	493_DART	12/27/09 08:56 AM
Re: Hughes SOLID cam users	StripeHOG	12/27/09 09:47 AM
Re: Hughes SOLID cam users	justinp61	12/27/09 12:27 PM
Re: Hughes SOLID cam users	S/ST 3040	12/27/09 02:13 PM
Re: Hughes SOLID cam users	70AARcuda	12/27/09 07:33 PM
Re: Hughes SOLID cam users	Mroctober	12/27/09 08:52 PM
Re: Hughes SOLID cam users	493_DART	12/27/09 08:56 PM
Re: Hughes SOLID cam users	tjmarcus1	12/27/09 09:43 PM
Re: Hughes SOLID cam users	nss guy	12/27/09 10:25 PM
Re: Hughes SOLID cam users	Wicked49670dart	12/27/09 11:06 PM
Re: Hughes SOLID cam users	493_DART	12/28/09 03:52 AM
Re: Hughes SOLID cam users	Wicked49670dart	12/28/09 04:03 AM
Re: Hughes SOLID cam users	JohnRR	12/28/09 05:21 PM
Re: Hughes SOLID cam users	tjmarcus1	12/27/09 07:41 PM
Re: Hughes SOLID cam users	JohnRR	12/27/09 11:07 PM
Re: Hughes SOLID cam users	Wicked49670dart	12/27/09 11:10 PM
Re: Hughes SOLID cam users	TS3303	12/27/09 11:19 PM
Re: Hughes SOLID cam users	Mroctober	12/28/09 01:16 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1