Quote:

How do you plan to address X bracing between the frame rails? Most of the newer chassis is designed for the drive shaft to run on top of the bracing and build a tunnel around it..Looks like this presents a problem in these older cars, were this bracing will be right were the drive shaft will be. By putting the driveshaft below the bracing puts the bracing way up in the floor boards..

Im still undecided on how to do this...but I have a few idea's.




If you need clearence when positioning the d/s above the tunnel X you could put a slight bend creating a V (apex at center) then attach other diagonal (2pc) to center.

p.s.-Thanks Al