Update 7-6-11
Lots been going on since January. I made some sacrifices and came up with some money, therefore the Cuda soaked it all up (about $12K worth). Here is a list of what I was able to get;
416 stroker kit from MRL (awesome)
Comp roller cam with lifters (MRL)
Billet timing chain (MRL)
Wilwood 13" front rotors & hats
Wilwood 12" rear rotors & hats
22 circuit wiring harness
Viper front calipers
93 Cobra rear calipers
Aluminum radiator
full set of autometer gauges
Kevko roadrace oil pan
EFI 6 pac intake
6 pack aircleaner
Firm feel stage 3 steering box
Firm feel fast ratio pitman and idler arm
Firm feel adjustable struts
Firm feel tubular upper control arms
Firm feel knuckles
Firm feel 11/16 tie rods
Firm feel 1.14 torsion bars
I built a new lower radiator cross member to tie in the front end.
Installed a 26" radiator side (was a 19")
installed the upper inner fenderwell support braces
finished installing the trunk floor
working on the front brakes now
slow but steady going.