|
Re: P0441 Code
[Re: Venomvpr900]
#495302
10/12/09 09:43 PM
10/12/09 09:43 PM
|
Joined: Dec 2003
Posts: 5,314 Carstairs, Alberta, Canada
dave571
master
|
master
Joined: Dec 2003
Posts: 5,314
Carstairs, Alberta, Canada
|
Quote:
POSSIBLE CAUSES
-EVAP Canister -Wiring Harness Intermittent -EVAP Purge Hose (Canister to Fuel Tank) -EVAP Purge Hose (Solenoid to Canister) -EVAP Purge Solenoid Vacuum Supply -EVAP Purge Solenoid (Leaky/Stuck Open) -EVAP Purge Solenoid (Stuck Closed)
Hope this helps
That code is not set by a loose gas cap or a leak in the system. (YOu would have leak codes then ie gross leak detected, small leak detected, etc..)
That code is usually set by a problem in the purge system.
If you pull off the canister and solenoid, you will likely find it is full of dirt. It may work if you clean it, but you may have to replace it all, or just some pieces.
|
|
|
|
|
|