W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!

Print Thread

Re: W9 Header flanges 3/8" or 1/2"??? [Re: catman408] #48310 11/29/07 11:54 AM 11/29/07 11:54 AM
Joined: Jan 2003 Posts: 8,547 State College, PA RyanJ moparts member
RyanJ moparts member Joined: Jan 2003 Posts: 8,547 State College, PA	On a W8, on one of the outer cylinders the bolt spacing will be 3.06" CL to CL if it is a circle track casting, which shares same bolt pattern with all "normal" W9's. If it is wider than that, it is a Drag head.....

Entire Thread
Subject	Posted By	Posted
W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	11/28/07 05:46 PM
Re: W9 Header flanges 3/8" or 1/2"???	RyanJ	11/28/07 06:22 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/28/07 06:29 PM
Re: W9 Header flanges 3/8" or 1/2"???	RyanJ	11/28/07 07:28 PM
Re: W9 Header flanges 3/8" or 1/2"???	MoparSprinter360	11/28/07 08:13 PM
Re: W9 Header flanges 3/8" or 1/2"???	RyanJ	11/28/07 10:06 PM
Re: W9 Header flanges 3/8" or 1/2"???	Leon441	11/28/07 10:50 PM
Re: W9 Header flanges 3/8" or 1/2"???	Dos Snails	11/28/07 11:04 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/28/07 11:15 PM
Re: W9 Header flanges 3/8" or 1/2"???	catman408	11/28/07 08:14 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/28/07 09:20 PM
Re: W9 Header flanges 3/8" or 1/2"???	dizuster	11/29/07 01:35 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 02:03 AM
Re: W9 Header flanges 3/8" or 1/2"???	dizuster	11/29/07 02:12 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 02:24 AM
Re: W9 Header flanges 3/8" or 1/2"???	W5Dart378	11/29/07 02:34 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 02:57 AM
Re: W9 Header flanges 3/8" or 1/2"???	Dos Snails	11/29/07 03:01 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 03:05 AM
Re: W9 Header flanges 3/8" or 1/2"???	Plumb Wired	11/29/07 03:04 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 05:18 AM
Re: W9 Header flanges 3/8" or 1/2"???	BobsProFab	11/29/07 02:10 PM
Re: W9 Header flanges 3/8" or 1/2"???	moparacer	11/29/07 02:34 PM
Re: W9 Header flanges 3/8" or 1/2"???	catman408	11/29/07 02:57 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 03:02 PM
Re: W9 Header flanges 3/8" or 1/2"???	catman408	11/29/07 03:45 PM
Re: W9 Header flanges 3/8" or 1/2"???	RyanJ	11/29/07 03:54 PM
Re: W9 Header flanges 3/8" or 1/2"???	catman408	11/29/07 04:13 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	11/29/07 04:17 PM
Re: W9 Header flanges 3/8" or 1/2"???	Plumb Wired	11/29/07 08:58 PM
Re: W9 Header flanges 3/8" or 1/2"???	catman408	11/30/07 02:06 AM
Re: W9 Header flanges 3/8" or 1/2"???	BobsProFab	11/30/07 02:22 AM
Re: W9 Header flanges 3/8" or 1/2"???	Dos Snails	11/30/07 02:29 AM
Re: W9 Header flanges 3/8" or 1/2"???	RyanJ	11/29/07 03:44 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	12/03/07 01:33 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	12/23/07 05:40 AM
Re: W9 Header flanges 3/8" or 1/2"???	MR_P_BODY	12/23/07 06:07 AM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	12/23/07 06:17 AM
Re: W9 Header flanges 3/8" or 1/2"???	jcc	12/23/07 12:17 PM
Re: W9 Header flanges 3/8" or 1/2"???	LA360	12/23/07 01:36 PM
Re: W9 Header flanges 3/8" or 1/2"???	W5Dart378	12/23/07 08:01 PM
Re: W9 Header flanges 3/8" or 1/2"???	W5Dart378	12/23/07 08:03 PM
Re: W9 Header flanges 3/8" or 1/2"???	DemonDust	12/23/07 08:35 PM
Re: W9 Header flanges 3/8" or 1/2"???	W5Dart378	12/23/07 10:49 PM
Re: W9 Header flanges 3/8" or 1/2"???	theclutcher	12/27/07 01:01 AM
Re: W9 Header flanges 3/8" or 1/2"???	jcc	12/24/07 12:30 AM
Re: W9 Header flanges 3/8" or 1/2"???	MR_P_BODY	12/26/07 02:33 PM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	Mike Swann	12/24/07 03:31 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group	DemonDust	12/26/07 06:25 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	440W8 Duster	12/27/07 01:06 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	MR_P_BODY	12/27/07 03:54 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	DemonDust	01/04/08 02:54 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	DemonDust	01/04/08 03:02 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	jcc	01/04/08 03:50 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	DemonDust	01/04/08 06:05 AM
Re: W9 Header flanges 3/8" or 1/2" Sale Orders Group Buy	STEFF	01/04/08 02:24 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/04/08 05:34 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	RyanJ	01/04/08 06:18 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	RyanJ	01/04/08 06:19 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/04/08 06:34 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/05/08 02:43 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/05/08 03:55 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	MR_P_BODY	01/05/08 04:28 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/05/08 06:05 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	MR_P_BODY	01/05/08 09:42 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Cal	DemonDust	01/06/08 04:40 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Mike Swann	01/05/08 04:52 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	01/06/08 10:51 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	01/06/08 10:54 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	01/06/08 10:57 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	02/08/08 04:22 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	02/08/08 04:46 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	02/08/08 05:10 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	theclutcher	02/08/08 01:32 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	STEFF	02/08/08 02:14 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	02/08/08 03:48 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	02/08/08 10:50 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	02/20/08 11:51 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	02/08/08 05:10 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	03/12/08 02:09 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	03/12/08 02:31 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	BobsProFab	03/12/08 02:39 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	03/12/08 02:44 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	BobsProFab	03/12/08 02:46 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	03/12/08 02:47 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	03/12/08 02:52 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	03/31/08 03:34 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	04/08/08 01:15 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	04/08/08 04:25 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	04/10/08 05:05 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	04/10/08 05:30 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	W5Dart378	04/10/08 06:01 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	04/10/08 10:21 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	440W8 Duster	04/12/08 04:18 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	04/12/08 06:46 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	04/12/08 12:29 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	05/23/08 12:07 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	05/23/08 07:51 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Laurent	05/23/08 01:00 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	05/24/08 05:58 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	W5Dart378	05/24/08 09:42 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	05/24/08 11:48 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	01/06/08 11:19 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	01/26/08 03:00 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	01/26/08 03:32 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	01/26/08 03:37 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	01/26/08 04:44 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Dos Snails	01/26/08 01:21 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	06/06/08 11:23 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	06/06/08 11:39 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	06/11/08 08:00 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Plumb Wired	06/12/08 01:19 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Anonymous	06/12/08 04:57 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	06/18/08 10:19 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	W5Dart378	06/18/08 04:16 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	RyanJ	06/18/08 04:47 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	11/22/08 03:50 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Laurent	11/22/08 10:40 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	11/22/08 04:00 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Laurent	11/22/08 05:43 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	DemonDust	11/22/08 06:14 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Laurent	11/22/08 07:24 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	12/24/08 05:07 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Laurent	12/24/08 06:22 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	W5Dart378	12/24/08 11:32 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/24/08 04:39 PM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	jcc	12/26/08 04:39 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/26/08 04:53 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Bill_G	12/28/08 02:20 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/28/08 02:39 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/28/08 03:11 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	goldmember	12/28/08 03:22 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/28/08 03:44 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	goldmember	12/28/08 03:51 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	Bill_G	12/29/08 01:35 AM
Re: W9 Header flanges 3/8" or 1/2" Group Buy Last Call!!!	MR_P_BODY	12/29/08 02:11 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To