Quote:

insrument/dash lights come on when i press brake pedal,another ground problem or do i have something crossed? thank you



It could be either. You could be creating a ground path through the switch, or you could be tying two circuits together.


I would try rigging up a temporary ground for the instrument panel to check. Usually there is a screw/bolt on the back of most Mopar panels that can be used for a ground wire from the panel to a screw or bolt on the dash or firewall/floorpan. Look for a screw that shows copper running up to the screw hole. If you have the factory service manual or aftermarket schematic diagram you can find the ground(s) in the schematic and verify they are present with an ohm meter.


You can put a 5 amp or less fuse in the wire if you are afraid of causing a