Valve spring installed height on stock BB castings

Print Thread

Valve spring installed height on stock BB castings #463032 09/08/09 12:50 PM 09/08/09 12:50 PM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von OP master
Von OP master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	What is the usual installed height for valve springs on stock BB castings with stock length valves? I ask because I have a set of roller springs that installed a 1.900 will coil bind at max lift, but if installed at 1.950 will be OK. Im in the mock up stage so I havent tried them at 1.950, but wondering about retainer to rocker clearance at 1.950 Anyone? Thanks 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Entire Thread
Subject	Posted By	Posted
Valve spring installed height on stock BB castings	Von	09/08/09 04:50 PM
Re: Valve spring installed height on stock BB castings	marvo451	09/08/09 05:56 PM
Re: Valve spring installed height on stock BB castings	MoparforLife	09/08/09 07:41 PM
Re: Valve spring installed height on stock BB castings	Cab_Burge	09/09/09 04:47 AM
Re: Valve spring installed height on stock BB castings	Anonymous	09/09/09 06:02 AM
Re: Valve spring installed height on stock BB castings	BSB67	09/10/09 12:15 AM

Hop To