Quote:

Quote:

Heat shields 3 each
Starter splash shield 4 ?
K frame shields 2 each
Rear axle rebound bumpers 2 each

I count 16



2 on each on front splash shield or ? 4
Axle rebound bumpers take captive washer 1/4-20 bolts (4)
Mine is 4 spd no spash shield.
Rear heat shields should take 1 each on front due to rear
portion of the heat shield attached to the tip hangers ?

So I would think total of 6 for 4 spd car and 10 for auto car.
Bill, Get ready to take an order.

logan426



the 2 smaller K-frame sheilds USUALLY take rivets, but I've seen nunerous used shields where the plastic was damaged due to a bolt turning and digging into them.

rear muffler shields take 3 each I believe.
1 on the front and 2 along the side where they bolt to the side of the frame rail. rear is tucked under the muffler hanger to trunk floor brackets