A couple of years ago I bought a used set of Strange large bolt pattern stock length axles for the 8 3/4 rearend in my Dart. I've finally got around to test-fitting them before I have new bearings installed. I have run into a problem with the brake drums and the axle lug bolt flange. The axle flange measures 6 1/4" in diameter and the drum lug-hole mounting surface is only 5 3/4" in diameter. They are 10" drums and the flange on the small bolt axles I am removing measure 5 3/8" in diameter. I wasn't aware that I was going to have to change the drums to accomodate the axles (other than drilling them for the larger pattern). My question is, what drums will I have to get that will have a large enough mounting surface to accomodate the 6 1/4" flange on the axles?