Quote:

Ok let talk about this some..I wanted my cam in at 102. numbers are intake open at 32 deg and close at 56.5 . that is @ .050 after opening and .050 before closing. Now there are two-three ways to do this.. Not saying any one way is wrong. This is how I do it.. might be wrong ??

add 32+56.5 + 180 = 268.5 div by 2 =134.25 - 32 =102.25
show me your numbers and how you do it.



Jamie thats the same way I check the numbers but
when I install it I sorta cheat. I have a gear drive
so I would (in your case) set the crank to 102 and
have the #1 intake at the top with my indicator on
it and slide the idler gear on... then make the before
and after(.050) checks to see if its correct and
adjust if needed