The measurements are as follows:

Bottom hole is 2 and 3/8" from back of glove box and 2" from top of glove box. Top hole is 5 and 3/8" from back of glove box and 1" from top of glove box.

I did not know that about the fader knobs. I am currently looking for the Standard dash fader now, it's the only piece I'm missing to get the radio working. I have standard dash knob and bezel, but the switch has the wires cut. Will a rallye fader switch work if I change the knob and bezel over to correct standard dash knob and bezel?

Joe