Type: RB block
Displacement: 446" (440+.030)
Compression ratio: 10.7:1
Head type: Edelbrock 300cfm intake, 225cfm exhaust (no tube)
Cam type: Solid flat tappet
Specs: 294@.008, 262@.050 .585 lift 108 LSA
Installed at: 103.5
Intake manifold: Edelbrock TM-7 w/2" CSI tapered 4-hole.
Exhaust: 2" primary 3.5" collector, X-pipe exhaust.
Carb type: RaceDemon 825
Size: 825
Jetting: 80 front 90 rear
Base timing: 30 degrees BTDC
Total timing: 40 degrees BTDC @ 1200

Power adder: Size 13 shoe
Type: NA
Blower impeller speed: NA
Nitrous jet combo: NA
Amount of positive manifold pressure/nitrous hit:
Intercooler: NA
Timing pulled if any: NA

Trans type: 727 auto
Torque Converter size: 9.5"
Stall behind your motor: 4700
Gear ratios: stock

Rearend ratio: 4.30
Tire size: 28"
Vehicle weight: 3625
Horsepower (if dyno'd, specify FWHP or WHP):
Torque (as above):
E.T. (specify 1/8th, 1/4): 10.79 1/4 mile
MPH (as above): 124mph