Quote:

I used OEM Satellite doors on my 1969 Rusty Roadrunner.

Can anyone please post measurements from front of 'road runner' emblem to edge of door, and also measurement from top of body line down to top of 'road runner' emblem?

This will also help the folks buying the new AMD door shells. THANKS MOPARTS!



I took these off a rusty door at a swap meet. I used a piece of paper and follded it about 1" along the edge and rested the edge on the upper crease body line of the door.



Door, passenger,14.25 first hole
11-9/16 third hole,8-11/16 last
4-13/16 down first hole
4-7/8 down last hole

If I recall, this gets you three of the four holes, the last one should be pretty simple to figure out based on the emblem.

I used a Vis-a-vis marker to mark the holes. That is a marker used for overhead projectors that markes very well on smooth painted surfaces, but comes of with water.

68 Road Runner (383/4speed, post car w/decor pkg) - Major Project
69 Road Runner w/472 Hemi & 4 speed.
70 Challenger R/T SE EF8 w/ V9J, U - A32 - Major Project
2023 Ford Mach 1