Piston rings - which is which?

Print Thread

Re: Piston rings - which is which? [Re: RapidRobert] #374030 07/13/09 11:57 PM 07/13/09 11:57 PM
Joined: Feb 2003 Posts: 21,318 Manitoba, Canada DaytonaTurbo Too Many Posts
DaytonaTurbo Too Many Posts Joined: Feb 2003 Posts: 21,318 Manitoba, Canada	Quote: Quote: The cast sealed power rings I bought came with the same rings for the top and middle. Were the bevels on the top inside(top ring)and the bottom inside(2nd ring)? cast/cast w no shiny moly face on the top ring(s) Base model sealed power cast rings for 440 standard bore size. All rings(except oil obviously) have the bevel on the same side as the dot. In fact all 16 rings are identical and all look like top rings. Are they okay to run or did I get a bad set?

Entire Thread
Subject	Posted By	Posted
Piston rings - which is which?	prothed	07/13/09 07:11 PM
Re: Piston rings - which is which?	RapidRobert	07/13/09 07:58 PM
Re: Piston rings - which is which?	64Post	07/13/09 08:17 PM
Re: Piston rings - which is which?	DaytonaTurbo	07/13/09 08:23 PM
Re: Piston rings - which is which?	RapidRobert	07/13/09 08:27 PM
Re: Piston rings - which is which?	DaytonaTurbo	07/14/09 03:57 AM
Re: Piston rings - which is which?	RapidRobert	07/14/09 04:49 AM
Re: Piston rings - which is which?	prothed	07/14/09 08:06 AM

Hop To