Quote:

Quote:

any part of the bushing have a hole to oil the pin? sure look's like the rod was drilled for it, but I see no hole in any of the bushing chunk's that I see, also look's like the rod was rough machined and not honed for a true bushing fit. Sorry about the damage.



i was looking at the same thing. the real problem is that you should probably re-bush all of the rods. i'd also add holes at 5 and 7 o'clock positions. it looks like you need a new pin also.



No I do not see any hole in bushing..But I will say it seems like there is plenty oil there..and all 8 look just like this..not just one. They all have to be done..Plus new wist pins..they are hurt.