The Brodix 540 made pretty good torque. 720 ft lbs @ 6000 rpm and it held on pretty well. The car it is going in has a 6200 stall converter and the guy shifts around 7400 rpm so it should stay in the powerband going down the track. He is thinking it might run an 8.90 once he gets it back to the track. The car runs low 9's now with a 780 hp iron block engine.

This pull was with a 1050 carb. The airflow turbine shows that the engine is using about 1100 cfm so we might try a bigger carb to see if that picks up some power. On the last pull the oil pressure started to drop so the pan needs to come off to see if the oil pump is bad. Always something!