Hey all, have a quick question. I have never messed with external oiling before, and after having low oil pressure issues, I've figured out all the o-rings are shot. Bought the Doty manufacturing washer kit for the pan. I did get it back to steady 65 lbs. Then last night realized the one on the back of the oil pump looked bad also. After getting the pump cover off(cause the back fitting hit the k member) of coarse the race for the oil pump slid out. My question is the pump gear timed? Part number on the side of the pump cover is 21200. Also what do you guys do to freshen up the pump? I cleaned the o-rings put new grease on them. Also noticed the pump gear a little chewed up in spots. Thanks