Dana 60 pinion preload - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Dana 60 pinion preload

Print Thread

Re: Dana 60 pinion preload [Re: challenger451ci] #3212946 02/12/24 01:54 AM 02/12/24 01:54 AM
Joined: Jan 2004 Posts: 8,339 fredericksburg,va C cudaman1969 master
cudaman1969 master C Joined: Jan 2004 Posts: 8,339 fredericksburg,va	I set them up at 12-13 inch pounds, no seal, no gears. Also they like it to be vertical, I have the 1/4” beam torque wrench. 0-25 inch pounds.

Entire Thread
Subject	Posted By	Posted
Dana 60 pinion preload	challenger451ci	02/12/24 03:55 AM
Re: Dana 60 pinion preload	CMcAllister	02/12/24 04:24 AM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 04:47 AM
Re: Dana 60 pinion preload	cudaman1969	02/12/24 05:54 AM
Re: Dana 60 pinion preload	Cab_Burge	02/12/24 06:44 AM
Re: Dana 60 pinion preload	6PKRTSE	02/12/24 12:50 PM
Re: Dana 60 pinion preload	dvw	02/12/24 02:08 PM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 05:17 PM
Re: Dana 60 pinion preload	challenger451ci	02/12/24 05:24 PM
Re: Dana 60 pinion preload	dvw	02/12/24 06:21 PM
Re: Dana 60 pinion preload	cudaman1969	02/12/24 07:30 PM
Re: Dana 60 pinion preload	GomangoCuda	02/12/24 08:35 PM
Re: Dana 60 pinion preload	challenger451ci	02/13/24 06:01 PM
Re: Dana 60 pinion preload	Cab_Burge	02/13/24 07:40 PM
Re: Dana 60 pinion preload	CMcAllister	02/14/24 01:17 AM
Re: Dana 60 pinion preload	BANDIT	02/14/24 04:16 PM
Re: Dana 60 pinion preload	Cab_Burge	02/12/24 06:27 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1