Iam looking at a cam for my 440 that is going into a 1966 Plymouth belvedere that will be a street car.9:1 compression pump gas 452 heads that have been pocket ported,-harlen Sharp- stock style rockers,manley push rods,steel crank,eagle rods,light pistons-30 over,balanced rotating assembly.Speed shop recondmends,Hyderlic cam and here the specs..duration @.050 cam lift int. 224 ext.234...sae duration int. 298 exh. 309....lobe center 107 exh. 117 Gross lift 455 exh. 488...cam lift 310 exh. 325..I want the motor to have good performace and have a nice sound , but be driveable.will this work?will it sound like a 440 that can run?Thanks for the help Donnie