It's late and I should be in bed,,

you need to get a couple pieces of 3/8-16 all-thread to use for slide/knockers to remove the front pump. Nuts and large washer on one end and a short piece of pipe or large socket to use as the knocker. A 36" piece is sold at the hardware stores.

The front drum will need press tool to disassemble and reassemble it. ebay sells cheap tranny clutch drum spring compressors or you can make your own. I've used a piece of 3/8" all-thread, scrap metal plate and a bench vice to compress the springs. ITEM 155707969259

ebay also sells a very nice seal and bearing driver kit.. I have several kits but this one beats all of them ITEM 393817772441

Like I said, it's late so I'm done.
ps, someone will fill you in on the other cool thing to fab up.