71 Demon - ALL new wiring; under dash, column, engine etc and NOS horn relay.

Horns had been working - Prestolite pair that I had the powder coater PAINT and not powder coat due to the heat.

Horns stopped working, checked fuses - all good.

Standard base steering wheel - push the button and you can hear the relay "click".
Took horn pad off and took the column connector off the steering wheel switch and grounded to the center nut, same thing relay just clicks.

Bought new relay - same thing just clicks.

Then ran piece of 14GA wire from the + post and touched it at the post and the terminal on each horn, nada.
Removed the horns from the brackets and laid them one at a time over the - battery post and touched the wire from the + post to the horn terminal and nada.

I did screw in/unscrew the adjuster screw on the front of the horn and same thing.

Could BOTH horns have gone bad? or am I missing something?



TIA