A look inside a Pro-Flite - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech A look inside a Pro-Flite

Print Thread

Re: A look inside a Pro-Flite [Re: STEFF] #3155497 06/30/23 09:04 AM 06/30/23 09:04 AM
Joined: Mar 2003 Posts: 2,521 PA moparacer master
moparacer master Joined: Mar 2003 Posts: 2,521 PA	Looks like the steel's are starting to wear on that aluminum drum pretty good. Might take a file and knock the edges off a little. Dealt with that on glides and the reverse clutch steel's. Have to put case savers in when it gets bad enough. 67 Barracuda street/bracket car 11.27-119 68 Dart 502 BB 8.70s-152 414 cid SB Dragster 7.65-174

Entire Thread
Subject	Posted By	Posted
A look inside a Pro-Flite	dvw	06/29/23 09:47 PM
Re: A look inside a Pro-Flite	dvw	06/29/23 09:55 PM
Re: A look inside a Pro-Flite	LA360	06/29/23 11:15 PM
Re: A look inside a Pro-Flite	A727Tflite	06/30/23 01:11 AM
Re: A look inside a Pro-Flite	J_BODY	06/30/23 01:22 AM
Re: A look inside a Pro-Flite	STEFF	06/30/23 10:07 AM
Re: A look inside a Pro-Flite	moparacer	06/30/23 01:04 PM
Re: A look inside a Pro-Flite	cudaman1969	06/30/23 01:34 PM
Re: A look inside a Pro-Flite	fbs63	06/30/23 02:10 PM
Re: A look inside a Pro-Flite	Al_Alguire	06/30/23 03:19 PM
Re: A look inside a Pro-Flite	340Cuda	06/30/23 04:27 PM
Re: A look inside a Pro-Flite	RobR	06/30/23 08:15 PM
Re: A look inside a Pro-Flite	dvw	06/30/23 08:55 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1