Setting bearings - is this normal?

Print Thread

Re: Setting bearings - is this normal? [Re: 375inStroke] #3129663 03/15/23 03:25 PM 03/15/23 03:25 PM
Joined: May 2019 Posts: 6,323 nowhere S Sniper master
Sniper master S Joined: May 2019 Posts: 6,323 nowhere	Originally Posted by 375inStroke Torque 50ft-lbs while spinning to fully seat the races and bearings, loosen, then torque to 90in-lbs. You should be able to line up the keeper without turning the nut. This is wrong From the FSM

Entire Thread
Subject	Posted By	Posted
Setting bearings - is this normal?	Secret Chimp	03/15/23 03:19 AM
Re: Setting bearings - is this normal?	PhillyRag	03/15/23 06:04 AM
Re: Setting bearings - is this normal?	mopars4ever	03/15/23 10:16 AM
Re: Setting bearings - is this normal?	375inStroke	03/15/23 05:36 PM
Re: Setting bearings - is this normal?	Sniper	03/15/23 07:25 PM
Re: Setting bearings - is this normal?	NITROUSN	03/15/23 05:49 PM
Re: Setting bearings - is this normal?	TJP	03/15/23 06:28 PM
Re: Setting bearings - is this normal?	Kern Dog	03/15/23 06:57 PM
Re: Setting bearings - is this normal?	CMcAllister	03/15/23 11:59 PM
Re: Setting bearings - is this normal?	Kern Dog	03/16/23 01:03 AM
Re: Setting bearings - is this normal?	PhillyRag	03/16/23 02:19 AM
Re: Setting bearings - is this normal?	Dcuda69	03/16/23 02:03 AM
Re: Setting bearings - is this normal?	340SIX	03/16/23 02:19 AM
Re: Setting bearings - is this normal?	Cab_Burge	03/16/23 03:48 AM
Re: Setting bearings - is this normal?	B1MAXX	03/16/23 11:44 AM
Re: Setting bearings - is this normal?	Black_Sheep	03/16/23 05:33 PM
Re: Setting bearings - is this normal?	moparx	03/16/23 05:49 PM
Re: Setting bearings - is this normal?	Secret Chimp	03/16/23 10:22 PM
Re: Setting bearings - is this normal?	JohnRR	03/17/23 04:46 PM
Re: Setting bearings - is this normal?	Cab_Burge	03/15/23 08:55 PM
Re: Setting bearings - is this normal?	Sniper	03/15/23 09:19 PM

Hop To