Originally Posted by mopar dave
The springs are set to height. The roller tips on intake set dead center and the exhaust are very close to center. Thats all i can tell at this point til i get them bolted on and get more parts.


Do you have .090" to .100" of clearance between the rocker arm and the outer edge of the spring? Then you should be ok...

Last edited by Dragula; 01/17/23 09:40 AM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk