8 3/4 powr-lok too tight? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 8 3/4 powr-lok too tight?

Print Thread

Re: 8 3/4 powr-lok too tight? [Re: Cab_Burge] #3055558 07/03/22 03:53 PM 07/03/22 03:53 PM
Joined: Jan 2003 Posts: 1,802 McGregor,Iowa 52157 5 500ciDuster top fuel
500ciDuster top fuel 5 Joined: Jan 2003 Posts: 1,802 McGregor,Iowa 52157	I used to run dana 44 clutches so they would act that way, they were a tad thicker

Entire Thread
Subject	Posted By	Posted
8 3/4 powr-lok too tight?	MoonshineMattK	06/22/22 08:18 PM
Re: 8 3/4 powr-lok too tight?	ZIPPY	06/22/22 08:26 PM
Re: 8 3/4 powr-lok too tight?	an8sec70cuda	06/22/22 08:31 PM
Re: 8 3/4 powr-lok too tight?	MoonshineMattK	06/22/22 08:33 PM
Re: 8 3/4 powr-lok too tight?	fourgearsavoy	06/23/22 01:51 AM
Re: 8 3/4 powr-lok too tight?	MoonshineMattK	06/24/22 03:06 PM
Re: 8 3/4 powr-lok too tight?	John_Kunkel	06/24/22 04:52 PM
Re: 8 3/4 powr-lok too tight?	MoonshineMattK	06/27/22 02:13 AM
Re: 8 3/4 powr-lok too tight?	fourgearsavoy	06/27/22 12:57 PM
Re: 8 3/4 powr-lok too tight?	Cab_Burge	06/27/22 04:46 PM
Re: 8 3/4 powr-lok too tight?	500ciDuster	07/03/22 07:53 PM
Re: 8 3/4 powr-lok too tight?	MoonshineMattK	06/27/22 02:19 AM
Re: 8 3/4 powr-lok too tight?	MoonshineMattK	06/27/22 02:20 AM
Re: 8 3/4 powr-lok too tight?	Pacnorthcuda	06/27/22 02:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1