Cometic gasket trim with head installed?

Print Thread

Cometic gasket trim with head installed? #3031958 04/08/22 07:22 PM 04/08/22 07:22 PM
Joined: Mar 2006 Posts: 9,875 MI, usa dvw OP master
dvw OP master Joined: Mar 2006 Posts: 9,875 MI, usa	Figured I'd ask before I remove the heads for the 3rd time. Any way to trim the gasket while assembled? I don't see any way. Should've paid attention to 440 Jim's thread. This is the 3rd pr of Cometic's on this engine. Never had the issue before. #4 and #5 exhaust pushrods hit the center portion of the gasket that doesn't set on the deck itself. Just hangs in the breeze. Any Ideas? Doug Last edited by dvw; 04/08/22 07:23 PM.

Entire Thread
Subject	Posted By	Posted
Cometic gasket trim with head installed?	dvw	04/08/22 11:22 PM
Re: Cometic gasket trim with head installed?	dodger mope	04/08/22 11:36 PM
Re: Cometic gasket trim with head installed?	INTMD8	04/09/22 12:53 AM
Re: Cometic gasket trim with head installed?	FastmOp	04/09/22 04:48 PM
Re: Cometic gasket trim with head installed?	67_Satellite	04/10/22 01:48 AM
Re: Cometic gasket trim with head installed?	moparacer	04/10/22 03:16 AM
Re: Cometic gasket trim with head installed?	Cab_Burge	04/10/22 05:26 PM
Re: Cometic gasket trim with head installed?	dvw	04/10/22 11:59 PM
Re: Cometic gasket trim with head installed?	Cab_Burge	04/11/22 12:10 AM
Re: Cometic gasket trim with head installed?	John Burdine	04/11/22 12:21 AM
Re: Cometic gasket trim with head installed?	dvw	04/11/22 12:46 AM

Hop To