So the new cage is in. Along with the new fiber glass dash. Looks nice. The old one had to be cut out. It was really bad.

Next problem was seated position and leg room....There just isn't any leg room with the fire wall so far back. I made the decision today to just cut all of it out. The fire wall, the trans tunnel, the floors, everything.

We will then set the engine and trans in it and then the seat and determine where the engine has to be and the new fire wall...What a mess.

Can't live with it the way it is. Trans tunnel is way too big and cramps my foot area bad.

There are so many awesome builds out there, this is where you have to get it right, or you end up selling the car because you hate it. And right now I hate the lack of leg room and how tight everything is. This is especially true for street strip car.

Last edited by Dragula; 12/31/21 07:30 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk