Quote:

---

is it ok for the bolts true the housing to be on the boltfor the adjuster lock or should it be beside it ?

---

Put the load bolts in so that they just press on the
center of the caps.... if you have seen a stock cap
break you will see that they break near the center of
the cap. I like to weld a heavy wall tube to the back
of the housing then weld it to the back brace, that
way you dont get oil in the back brace... then weld
a nut on the back brace so its holding the load.
Look at Crazy's pic and you can see how its all done
EDIT
if it presses on the bolt... no big deal it JUST
pressing on it, I just snug it on the bolt/cap
then tighten the lock nut