Rocker geometry ??

Print Thread

Rocker geometry ?? #293800 04/20/09 11:03 AM 04/20/09 11:03 AM
Joined: Oct 2005 Posts: 976 ontario canada mac56 OP super stock
mac56 OP super stock Joined: Oct 2005 Posts: 976 ontario canada	In general will putting a lash cap on my valve tip help my tip contact area. These are bb eddie heads with 1.5 H.S. rockers. It looks to me that it helps at max lift to get the roller farther away from the outside edge of the valve tip. It appears that with the bb rocker geometry a higher starting point is a little better. It will also correct that rocker to retainer clearance issue I have. Does anyone else run caps with this set up. Thanks Mark

Hop To