Originally Posted by fourgearsavoy
Originally Posted by GY3
I''m using the slightly larger .545 lift version in my 505. Lots of miles and use and it has worked really well with zero issues.


Not to hijack but what springs are you guys using on the hydraulic roller cams? I watched Vizards video on beehive springs and was wondering if there were any new advancements in hydraulic roller springs.
I went with a little too much flat cam in my street car so I was thinking of going to a "smaller" cam either solid roller or hydraulic roller.
Gus beer


Unfortunately, the springs had been put on the heads before I got them. I had the machinist check them out and he said they were good to go. I have no information on what they are.

'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.