Originally Posted by JAKE68
i dont under stand what is wrong with that rpm? you have a good rod that can handle a lot more rpm than that. with that power level its not like a few hundred rpm is going to be any easier on the motor. run it.


I agree.
3.75” stroke, aftermarket rods, 6600....... no problem.

I turned a little more than that in my 440 with heavy TRW’s and LY rods.
I don’t advocate that, but I did it for years.

68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123
Dealer for Comp Cams/Indy Heads