Holley Street Dominator is the perfect intake for this. Mine was ported by Streetwize (Bobby) here on the board. Great low end throttle response, pulls hard to 6500 redline and fits under stock hoods easily.

I built really close to what you are doing save for the fact that mine is a 505. We took down a C7 'Vette rolling from 40mph on the highway tonight so it runs pretty good. grin

Your heads are easily cnc ported by Modern Cylinder Head and will match the big cubes perfectly if you are so inclined.

We've broken everything from the ears off the front driveshaft yoke to the rear u-joint to tearing up a brand new Mancini Racing cone type 3rd member so plan your drivetrain upgrades accordingly! 1350 joints are a requirement!


Last edited by GY3; 10/10/20 11:55 PM.
'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.