piston clearance? 915 w/domed?

Print Thread

Re: Deck height with 915 heads w/domed trw's [Re: KryslerKid] #279344 04/23/09 12:35 PM 04/23/09 12:35 PM
Joined: Feb 2008 Posts: 20 Wayne, Michigan USA K KryslerKid OP member
KryslerKid OP member K Joined: Feb 2008 Posts: 20 Wayne, Michigan USA	Dumb question, measuring deck height with domed pistons, I'm assuming I need to measure the flat portion of the piston? Also, do I need to be concerned with the domed portion for 915 heads? Also I'm told .035-.040 for optimum quench. If my slugs are .045-.050 in the hole, what's my best bet without shaving the block? Thank you! KK

Entire Thread
Subject	Posted By	Posted
piston clearance? 915 w/domed?	KryslerKid	04/06/09 06:50 PM
Re: piston clearance? 915 w/domed?	ademon	04/06/09 07:24 PM
Re: piston clearance? 915 w/domed?	RapidRobert	04/06/09 07:39 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	KryslerKid	04/11/09 02:19 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	therocks	04/11/09 03:10 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	RapidRobert	04/23/09 08:24 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	JohnRR	04/23/09 08:37 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	RapidRobert	04/23/09 08:46 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	KryslerKid	04/23/09 09:17 PM
Re: piston clearance? 915 w/domed? RAPIDROBERT	JohnRR	04/24/09 12:49 PM
Re: Deck height with 915 heads w/domed trw's	KryslerKid	04/23/09 04:35 PM
Re: Deck height with 915 heads w/domed trw's	JohnRR	04/23/09 05:14 PM

Hop To