W2 59' valve train help - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech W2 59' valve train help

Print Thread

Re: W2 59' valve train help [Re: tuff440] #2673829 07/03/19 10:49 PM 07/03/19 10:49 PM
Joined: Jan 2005 Posts: 2,540 Milwaukee WI T TRENDZ master
TRENDZ master T Joined: Jan 2005 Posts: 2,540 Milwaukee WI	Offset lifters load the link bars any time the pushrod is not truly perpendicular to the lifter bore. A 59° block has the worst angular alignment of any engine I have ever seen. Offset lifters in a 59° block would be the worst application I can imagine for loading the link bars/ rivets. Last edited by TRENDZ; 07/03/19 11:09 PM. "use it 'till it breaks, replace as needed"

Entire Thread
Subject	Posted By	Posted
W2 59' valve train help	tuff440	07/03/19 10:26 AM
Re: W2 59' valve train help	Bad340fish	07/03/19 11:29 AM
Re: W2 59' valve train help	madscientist	07/03/19 04:45 PM
Re: W2 59' valve train help	b1dartsport	07/03/19 07:28 PM
Re: W2 59' valve train help	B3422W5	07/03/19 08:40 PM
Re: W2 59' valve train help	tuff440	07/03/19 10:37 PM
Re: W2 59' valve train help	madscientist	07/03/19 08:48 PM
Re: W2 59' valve train help	Neil	07/03/19 09:25 PM
Re: W2 59' valve train help	madscientist	07/03/19 09:31 PM
Re: W2 59' valve train help	GTX5877	07/07/19 03:24 PM
Re: W2 59' valve train help	b1dartsport	07/03/19 09:47 PM
Re: W2 59' valve train help	tuff440	07/03/19 11:30 PM
Re: W2 59' valve train help	madscientist	07/04/19 01:01 AM
Re: W2 59' valve train help	TRENDZ	07/04/19 02:49 AM
Re: W2 59' valve train help	tuff440	07/03/19 10:12 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1