Originally Posted by DAYCLONA
Originally Posted by Old School
Thanks Mike! So I do not need to remove the spedo from the car?



You can do it "in car", you'll need to remove most of the dash/instrument fascia panels to get down to the clear plastic lens for removal,the speedo can stay in the cluster, a pair of thin needle nose pliers with a 90 degree turn to the tips will help in holding the speedo pin stem steady while R&R'ing of the needle


This may be possible, but there is enough disassembly required to get to the point of being able to remove the clear plastic lens that you might as well make it easy on yourself and just pull the entire gauge cluster out so that you can work on the thing on a bench or table "like a gentleman".