Quote: There are several articles in the tech archives on the subject. My low deck 470 worked great with HP manifolds and ported Edelbrock heads. You have to use the right cam though. I did a lot of cam testing and the MP .528 solid was better than any of the custom cams that were ground for that motor. http://www.moparts.org/Tech/Archive/bigblock.html
what do you think the most dur@50 you can have with 500 inch 440 with manifolds. my cam design so far is duration @ 50 int 246/250 ext solid flat tappet 555 intake lift 565 ext 112 lsa and icl 108, my motor plan 500 inch kit flat top pistons 10.59 comp with 88cc eddy heads. i want to put down over 500hp on rear wheel dyno
