Originally Posted by Airwoofer
Originally Posted by an8sec70cuda
Always been a fan of the Indy cast covers w/o their logo on them. I milled the logo off of mine.
The ones from Summit looks just like the Indy covers, so I'd try them.
I also like the old school M/T and Cal Custom covers...have a pair of each hanging on the wall to use on something in the future possibly.

Never been a fan of the fabricated valve covers personally. They look cheap to me for some reason, even though the good ones are pricy.

Here's a pic of the Indy covers after milling off the logo...


I did the same thing but took it one step further and milled off the indy logo on the intake also.


I also like the look of the cast covers best....

Ditto on the logo delete option on all mine....no logo unless it was free....and nobody gives away free stuff anymore.

DSC00001.JPGDSC05685.JPGKIMG0360.JPG
Last edited by Dragula; 06/06/19 10:48 AM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk