#1-Can the battery cables touch while the vehicle has the battery removed and not cause issues? I am guessing they can since the battery is out. Car is in storage and battery is removed and cables are not touching, but just curious in case they do get moved and bump each other. Was planning on doing some cleaning up on the wiring and such and wanted to double check.
#2-If I wanted a battery cutoff just to make sure there is no draw (no power when at car shows or if I am cleaning the interior/working inside and doors are open for a while), can I just hook it inline between the battery and ground point? I have a negative cable at the battery that has a small body ground and the other end goes to the alternator bracket for a ground. Could I just add a cutoff in the middle of the negative cable or should I add it to the end (as if it was the battery) and a small cable to the negative post of the battery? Here is what I was looking at and not sure which one I wanted. Side post battery and don't like taking the bolt out all the time due to stripping a battery thread once.
https://www.summitracing.com/parts/sum-g1442/overview/https://www.summitracing.com/parts/sum-g1432/overview/
