ring gap location placement needed

Print Thread

Re: ring gap location placement needed [Re: RapidRobert] #2563019 10/12/18 05:27 PM 10/12/18 05:27 PM
Joined: Oct 2006 Posts: 149 Cleveland Ohio Discoquik member
Discoquik member Joined: Oct 2006 Posts: 149 Cleveland Ohio	Usually rings just need to be clocked 45 degrees from each ring that's below it. The cross hatch in the cylinder will make the rings spins anyway so it's kinda pointless but a good practice.

Entire Thread
Subject	Posted By	Posted
ring gap location placement needed	RapidRobert	10/09/18 01:10 AM
Re: ring gap location placement needed	polyspheric	10/09/18 01:19 AM
Re: ring gap location placement needed	Cab_Burge	10/09/18 02:47 AM
Re: ring gap location placement needed	RapidRobert	10/09/18 05:15 AM
Re: ring gap location placement needed	Discoquik	10/12/18 09:27 PM
Re: ring gap location placement needed	CMcAllister	10/12/18 09:54 PM
Re: ring gap location placement needed	RapidRobert	10/13/18 06:30 AM
Re: ring gap location placement needed	383man	10/14/18 04:06 AM
Re: ring gap location placement needed	RapidRobert	10/14/18 05:50 AM

Hop To