Noticed on a history search that FlyFish ran this cam in a 408 Barracuda and had good results. I thought my converter was going as the car slowed each pass by .020
Changed the converter and rechecked the cam degree and advanced it 4* to have the 110.
Last year it ran 11.00@120 with wore out slicks and this year with new slicks was 11.36@118 11.49@117 then the next day was 11.63@115 11.87@112
I'm looking at pulling the motor and put it on a engine dyno and see WTH is going on
Yes, that cam worked unexpectedly well with my 410 combo years ago. Had a best of 10.5 @126mph, but usually ran in the 10.7's.
Sounds like you have other issues unrelated to the cam with it losing mph on every pass...not good. Check the trans, see if you are burning it up (smell the fluid, see if it stinks).
