Hey guys - I'm considering a cam change for my 505 street engine in my Challenger. Currently it has stock stealth heads and Comp xe284 cam. Basically a 240@.050 and .507, 110lsa hydraulic ft. I was looking at the Comp xe295hl, also hyd ft with 251@.050 and .565 lift. I'm also planning CNC porting or trick flows. Seems like substantial enough potential gain to make it worth the work, but any opinions to share? I may just CNC the heads and add 1.6 rockers for the easiest swap. Or I may go all out and add hyd roller... It's a street car with a 4 speed and 3.55's. Might go down the strip now and then, but I enjoy making them faster regardless. Thanks