My 1989 360 is almost ready to be installed. It’s been a trying procedure due to cracked head issues. I ended up with a set of 596 casting heads that had to have the push rod holes enlarged for hydraulic roller duty. I used a Hughes whiplash 318 cam,comp 901 springs,10 degree comp locks and retainers,new stock roller lifters. I decided to use a near new performer 318/360 intake with a street demon 750 carb. Also going with my MSD billet distributor,6A box,8.5 mm wires and blaster coil. Behind it I’ve decided to use a Boss Hog 2200-2800 converter and 3:55 sure grip. All this is in a 1987 D150 long bed truck that has been waiting 4.5 years to be resurrected!